Abstract

Bu çalışmada, 1,5 mm kalınlığa sahip TRIP 800 çelik plakaları bakır esaslı S Cu 6100 (CuAl8) teliyle gaz metal ark lehimleme yöntemiyle birleştirilmiştir. Numuneler, bindirme birleştirme formunda hazırlanmıştır. Koruyucu gaz olarak argon kullanılmıştır ve lehimleme işlemleri 8, 10, 12, 14 ve 16 L/dk koruyucu gaz çıkış hızında yapılmıştır. Birleştirme noktalarının çekme dayanımı belirlenmiştir ve TRIP 800 çeliğinin gaz metal ark lehimleme tekniğiyle farklı koruyucu gaz çıkış hızlarında birleşebilirliğini görmek için birleştirme noktalarının mikro ve makroyapıları optik mikroskopta incelenmiştir.

References

[1] Varol F, Ferik E, Ozsarac O, Aslanlar A, Influence of current intensity and heat input in Metal Inert Gas-brazed joints of TRIP 800 thin zinc coated steel plates. Mater Des 2013;52:1099-1105. 

[2] Zhou Y, Hojo T, Koyama M, Ajito S, Akiyama E. Synergistic effects of hydrogen and deformation temperature on mechanical properties of TRIP-aided bainitic ferrite steel. Mater Sci Eng A 2022;842:143070.

[3] Kohar CP, Cherkaoui M, Kadiri HE., Inal K. Numerical modeling of TRIP steel in axial crashworthiness. Int. J. Plast 2016;84:224-254.

[4] Burda I, Zweiacher K, Arabi-Hashami A., Barriobero-Vila P., Stutz A, Koller R et al. Fatigue crack propagation behavior of a micro-bainitic TRIP steel. Mater Sci Eng A 2022;840:142898.

[5] Choi KS, Liu WN, Sun X, Khaleel MA. Microstructure-based constitutive modeling of TRIP steel: Prediction of ductility and failure modes under different loading conditions Acta Mater 2009;57:2592-2604.

[6] Nasri K, Abbadi M, Zenasni M, Azari Z. Numerical and experimental study of crack behaviour at the zinc/TRIP steel 800 interface. Comput Mater Sci 2014;82:172-177.

[7] Sojkaa J, Váňováa P, Vodáreka V, Sozańska M. Diffusion of hydrogen in the TRIP 800 steel. Procedia Materials Science 2016;12:66-71.

[8] Chamat A, Aden-Ali S, Gilgert J, Petit E, Nasri K, Abbadi M, Azari Z. Crack behaviour in zinc coating and at the interface zinc-hot galvanised TRIP steel 800. Eng Fract Mech 2013;114:12-25.

[9] Guzman-Aguilera JJ, Martinez-Gonzalez CJ, Baltazar-Hernandez VH, Basak S, Panda SK, Razmpoosh MH et al. Influence of SC-HAZ microstructure on the mechanical behavior of Si-TRIP steel welds. Mater Sci Eng A 2018;718:216-227.

[10] Iordachescu D, Quintino L, Miranda R, Pimenta G. Influence of shielding gases and process parameters on metal transfer and bead shape in MIG brazed joints of the thin zinc coated steel plates. Mater Des 2006;21:381-390.

[11] Singha J, Arorab KS, Shukla DK. High cycle fatigue performance of cold metal transfer (CMT) brazed C-Mn-440 steel joints. Int J Fatigue 2020;137:105663.

[12] Singha J, Arorab KS, Shajanb N, Shuklaa DK, Shome M. Role of bead shape and dispersed intermetallic phases in determining the strength of CMT brazed DP780 lap joints. J Manuf Process 2019;44:207-215.

[13] Zhi-shui Y, Rui-feng L, Kai Q. Growth behavior of interfacial compounds in galvanized steel joints with CuSi3 filler under arc brazing. T Nonferr Metal Soc 2006;16:1391-1396.

[14] Basak S, Das H, Pal TK, Shome M. Characterization of intermetallics in aluminum to zinc coated interstitial free steel joining by pulsed MIG brazing for automotive application. Mater Charact 2016;112:229-237.

[15] Zhang HT, Feng JC, He P, Hackl H. Interfacial microstructure and mechanical properties of aluminium–zinc-coated steel joints made by a modified metal inert gas welding–brazing process. Mater Charact 2007;58:588-592.