Abstract

Braking is a process which transform the kinetic energy of the rotor into heat energy. During the braking phase, the frictional heat generated at the interface rotor–pad can lead to high temperatures (> 600 oC). In long-term frequent use of braking, increased temperature causes disc distortions, heat cracks, and causes degradation of the pad material. This creates a risk in the reduction of rotor-pad interface friction and loss of brake performance under safe driving conditions. In this study, the thermal monitoring of the thermal spray coated rotor was investigated and the variation of the friction coefficient and wear related thickness were measured. In addition, changes in torque forces at increasing temperatures were also evaluated.

References

[1] Belhocine A., Bouchetara M., Thermal analysis of a solid brake disc, Applied Thermal Engineering 32(1):2012, 59–67.

[2] Muthuvel, A., Prakash, N., and Louis, S. W., Numérical analysis of a rotor disc for optimization of tire disc materials. J. of Mechanical Engineering and Automation, 5(3B ), (2015). 5-14.

[3] Talati, F., and Jalalifar, S. (2009). Analysis of heat conduction in a disk brake system. Heat and Mass Transfer/Waerme-und Stoffuebertragung, 45(8), (2009), 1047-1059.

[4] Chavan C. B., Morea A. S., Patil N. N., Baskar P.b, Static structural and thermal analysis of brake disc with different cut patterns, J. Appl. Res. Technol vol.16 No.1 2018,41-52.

[5] Kim Y., Hong I., Study for Brake Friction Value and Anti Corrosion Performance by FNC Disc Compound Layer Thickness, Transactions of Korean Society of Automotive Engineers 27(5):2019, 399-404

[6] Aranke O., Algenaid W., Awe S., Joshi S., Coatings for Automotive Gray Cast Iron Brake Discs: A Review, Coatings 9, 552, 2019,1-27.

[7] Barbezat, G. Thermal spray coatings for tribological applications in the automotive industry. Adv. Eng. Mater. 8, 2006, 678–681.

[8] Altuncu E., Akyüz R., Applicability investigation of alumina-titania based plasma spray coating on cast iron brake discs for battery electric vehicles, Res. Eng. Struct. Mat. Vol. 6 Iss. 3 (2020) 283-292.