The Academic Perspective Procedia publishes Academic Platform symposiums papers as three volumes in a year. DOI number is given to all of our papers.
Publisher : Academic Perspective
Journal DOI : 10.33793/acperpro
Journal eISSN : 2667-5862
 Shashok Zh. S. and other, The Influence of Recipe Ingredıents of Elastomeric Composition on The Elastıc-Deformation Properties of Tire, Chemistry, Organic Substances Technology and Biotechnology,2013, 125-128.
 Mather PJ, Thomas KM, Carbon Black/High Density Polyethylene Conducting Composite Materials: Part I Structural Modi?cation of a Carbon Black by Gasi?cation in Carbon Dioxide and The Effect on The Electrical and Mechanical Properties of The Composite. J Mater Sci, 1997, 32(2), 401–407.
 Donnet JB (ed), Carbon Black: Science and Technology, 2nd Edition, CRC Press, Boca Raton,1993.
 S.S.Choi, Effect of Filler–Filler Interaction on Rheological Behaviour of Natural Rubber Compounds Filled with Both Carbon Black and Silica, Polymer International, 2003, 52, 23-28, DOI: 10.1002/pi.975.
 Bhowmick A.K., Hall M.M., Benary H.A.: Rubber Products Manufacturing Technology, Marcel Dekker, CRC Press, New York, 1994.
 Kysela G., Hudec I., Alexy P., Manufacturing and Processing of Rubber, 1st ed., Pearson, Slovakia, 2010.
 Dick J., Henry P., Application of a New Dynamic Mechanical Rheological Tester in Measuring Carbon Black and Oil Effects on Rubber Compound Properties, Journal of Elastomer and Plastics, 2005, 27, DOI: 10.1177/009524439502700103.
 Vecera M., Lubos Prokupek, Jana Machotova, Jaromır Snuparek, Some Properties of Composites Based on Vulcanized Liquid Polybutadiene Matrix and İnorganic Particulate Fillers, Journal of Applied Polymer Science,123, 128 (4), 2277-2282, DOI: 10.1002/app.38126.
 www.elastomer.kuraray.com/klr/grades/, (Access: 18 August 2019).
 Isono Y., J. D. Ferry. Stress Relaxation and Differantial Dynamic Modulus of Carbon Black-Filled Styrene-Butadiene Rubber in Large Shearing Deformation, Rubber Chem. and Tech., 1984, DOI: 10.5254/1.3536050.
 Jamshidi M., Afshar F., Mohammadi N., Pourmahdian S., Study on Cord/Rubber Interface at Elevated Temperatures by H-Pull Test Method, Applied Surface Science, 2005, 249, 208–215, DOI: 10.1016/j.apsusc.2004.11.081.